PROPERTIES
A leading product equals peace of mind: podiatric silicone compound conforms to the most demanding scientific standards and is formulated for medical use only.

Lab tests include all aspects of clinical behavior: appearance, exudation, working time, vulcanization, hardness after 8 minutes (shore 00), hardness after 24 hours (shore A), uniformity of vulcanization (mm/10), density (gr/cm2), mechanical properties such as toughness and stretchability (100%), and resistance to tearing.
The results confirm as a market leader in its field.

It is made available in sealed 500 gr. jars. Its homogeneous consistency permits direct mixing with the curing agent without any previous kneading.

INSTRUCTIONS FOR USE
1.- Carefully select the amount of putty for the needed orthosis. Try to avoid adding after the initial fabrication.

2.- Pour several drops of catalyst onto the putty and knead thoroughly for up to 30 seconds until uniform impregnation has been achieved.

3.- Make a ball of the putty by gently rubbing it in your hands in order to avoid creases in the final product.

4.- Apply with care on the chosen foot area and form to the desired shape with gentle padding.

Important note regarding the Luga Catalyst:
- Once the required drops have been delivered, cap up the bottle in order to prevent crystallization of the curing agent.
- Avoid contact with eyes or mouth and wash hands after fabrication of an orthosis

Silicone Jar 500grs.: ref. 049700
Liquid Catalyst 33c.c.: ref. 060200
Paste Catalyst 22grs.: ref. 060500